圣霖國際吊車軌報價承諾守信「多圖」

硬質合金輥環廣泛應用于高速線材軋機的精軋機架，以及部分高速線材軋機的預精軋機架和棒材軋機的精軋機架。硬質合金軋輥的優點是硬度高、耐磨性好，單槽軋鋼量可以達到高速鋼軋輥的兩倍。

The cemented carbide roller ring is widely applied to the finishing mill housing of high-speed wire rod mill, as well as the finishing mill for some high speed wire rod mill and the pre finishing mill and bar mill. The biggest advantage of the hard alloy roll is high hardness and good wear resistance, and the amount of single groove rolled steel can reach two times of the high speed steel roll.

19世紀下半葉歐洲煉鋼技術的進步要求軋制更大噸位的鋼錠，無論是灰鑄鐵或冷硬鑄鐵軋輥的強度均已不能滿足要求。含碳量為0.4%～0.6%普通鑄鋼軋輥相應誕生。重型鍛壓設備的出現更使這種成分的鍛造軋輥的強韌性得到進一步提高。

In the second half of the nineteenth Century, the progress of steelmaking technology in Europe requires larger tonnage steel ingots to be rolled. Neither the strength of gray iron or chilled cast iron rolls can meet the requirements. The ordinary cast steel roll with a carbon content of 0.4% to 0.6% is born accordingly. The emergence of heavy forging equipment makes the strength and toughness of the forging roll of this component further improved.

線材軋機擁有粗軋機架和與小型型材軋機類似的中間機架。與兩線軋制的小型型材軋機相比，這些軋機一般被設計成可以進行高達4線的同時軋制的切分軋制。然而，目前的發展趨勢是采用單線的高速軋制。

The wire mill has a roughing mill stand and an intermediate rack similar to a small section mill. Compared with the two section rolling mill, these mills are generally designed for rolling up to 4 lines at the same time. However, the current development trend is single line high-speed rolling.

軋機布置和道次設計  

機架在生產線的位置以及道次設計對軋輥的選擇有很大影響。根據機架位置，軋輥的受力方式和性能可以有很大變化。這是因?yàn)閼?yīng)用于粗軋機架和精軋機架的軋輥有非常不同的受力方式，從而導致軋輥性能有預期的改變.

Rolling mill layout and pass design

The of the rack in the production line and the design of the pass have great influence on the choice of the roll. According to the  of the frame, the force and performance of the roller can be greatly changed. This ibecause the rolls used in roughing mill stand and finishing mill stand have very different forces, resulting in expected changes in roll performance.